When it comes to the best trailer hitch bumper guard, there are a lot of questions that need to be answered. How much should you spend? Which will provide the most protection for your vehicle? What are the benefits of using one? This article aims to answer all these questions and more by presenting reviews of different products with helpful tips on how to install them.
A best trailer hitch step bumper guards is a protective device for the end of your vehicle’s tow hitch. They are designed to be bulky, which makes them an effective obstacle in preventing other vehicles from getting too close to your car or truck when you’re stopped on it (ex: at traffic lights).
A best trailer hitch step bumper guards works by either preventing the other vehicle from getting too close to your car or truck, or minimizes damage if they do manage to collide with you. For example, a full-length model can prevent rear end collisions as it covers most of your tow hitch and is difficult for another vehicle to maneuver around. If an impact does occur however, their design will allow them to take much of the force without transferring that energy into your car’s frame (which could cause serious damage).
Mostly these are made up in steel bars which are sturdy enough against any type of collision while not really affecting the aerodynamics when fitted properly on the back side of the vehicles behind its tail light area. Hitch mounted bumpers provide protection to your vehicle against any kind of accident. They are designed in such a way that they act as an obstacle between the back of your car and other vehicles when you’re parked on it, thus preventing collision with the rear end of your vehicle.
The best trailer hitch bumper guards can also protect from accidents if they happen at higher speeds where cars collide with each other frontally or run into objects head-on while traveling in opposite directions. Such type of collisions normally involve huge impact force which may be absorbed by the bumpers mounted behind tail lamps area for protection purpose thereby saving considerable damage to valuable property otherwise caused due to high speed impacts.
Best Trailer Hitch Step Bumpers
The TGL hitch step is a universal accessory for two-inch receivers. The construction of the trailer hook includes heavy duty steel which ensures strength and durability, even when carrying maximum weight.
The design makes it easy to install; simply remove the pin that holds the ball mount in place then slide out with ease before reinserting into your receiver tube, attach whatever equipment you like (bike rack, cargo carrier etc.), tighten everything down securely and drive away!
It has an open frame style with built-in rubber bumpers on each side making this bumper guard perfect for extra protection against scratches or paint damage while loading or unloading goods from your vehicle’s rear end.
One thing we really liked about this particular model was how it can fold up against your receiver when not in use and out of the way.
- Durable, sturdy construction with rubber bumpers
- Can fold up when not in use for added convenience
- Only fits two inch receivers.
The Bully Black Bull Utility Hitch Step is a highly versatile, functional and economical hitch step for all types of passenger vehicles. This model not only works great as a bumper guard but can also be used to stabilize the vehicle while loading or unloading cargo into your trunk area
It features an extended length design with rubber-coated grip surface which gives you added stability when climbing in and out of your car; this means it’s particularly useful when carrying heavy items such as groceries or luggage. The open frame style provides maximum safety by ensuring that no one steps on any moving parts like the ball mount pin etc. When folded up against the receiver there are built-in bumpers at each side making this unit perfect for protecting your receiver.
The tube-style design allows the Bully Black Bull Hitch Step to be installed quickly and easily in most vehicles with a Class III or IV receiver. This model is compatible with both factory receivers as well as aftermarket models equipped with standard size openings between two inches by three inches .
It can also fit into an oversized space of up to four inches wide when using an extension piece that comes included free of charge. The hitch step includes all hardware needed for installation, which typically takes less than ten minutes on average. A longer pin will have to be used if you are installing this unit onto an oversized receiver opening. Please make sure it fits within your vehicle’s class rating before buying!
- Versatile, functional and economical
- Rubber-coated grip surface for added stability while climbing in or out of your vehicle
- Simple to install with included hardware; works great as a bumper guard
- Open frame style provides maximum safety by ensuring that no one steps on any moving parts like the ball mount pin etc. when folded up against receiver
- Noisy if not oiled properly before use.
The HitchMate Truck Step by Heininger is a durable, high-quality hitch step for any truck owner. This model comes in two models – one that fits into the receiver opening of Class III hitches and another designed to fit into Class II/IV openings .
It provides increased safety when climbing up or down from your vehicle thanks to its non-slip design which features diamond treads on each side combined with an open frame style brake foot pedal; this ensures maximum stability even if you are carrying heavy items around. The rubberized floor plate helps prevent rust formation during prolonged exposure to water while simultaneously preventing slippery surfaces caused by ice or snow build up in winter months. Additionally, there’s no need for assembly because it comes pre-assembled and is simple to install.
Its capacity is up to 300 pounds with a weight of just 20 lbs making it convenient for most users including those that have limited mobility or suffer from arthritis, use walkers or crutches. Also included in the package are all necessary mounting hardware as well as detailed instructions on how to complete installation within a couple minutes without requiring special skills or tools. This product comes backed by Heininger’s Limited Lifetime Warranty which ensures you receive 100% money back if not satisfied with its performance over time . In this case, there is no need for concern because customers constantly praise this model’s ease of use along with excellent customer service provided by Heininger whenever needed..
- Durable, high-quality materials used for construction
- Easy to install without the need of special tools or skills
- No cons reported yet.
The iStep is an aluminum hitch-mounted step that provides increased safety when getting in and out of your vehicle, especially for those who have limited mobility or use walkers. It features a non-slip tread to ensure superior stability even if you are carrying heavy items around, while the open frame style brake pedal prevents any accidents caused by slipping .
Although it’s primarily designed to fit into Class III hitches with holes measuring up to two inches , some customers suggested pairing this model with additional accessories such as sturdy rubber straps to prevent moving or turning during transport which can become dangerous in certain situations. However, this accessory wasn’t included upon delivery because it’s sold separately but will be provided at no extra cost once requested from APS .
This model features a unique design that makes installation easier than ever before. All you need to do is lift it into place, then push down on the two side pins until they lock into position . It’s also very sturdy and lightweight which makes storage easy , but some people reported having trouble with its smooth finish since their shoes kept catching onto it when getting in or out of the vehicle .
The iStep is currently available for purchase on Amazon at an affordable price considering all the benefits it offers (check current offer here ). As far as warranty goes, this accessory comes backed by APS who provides every customer with lifetime technical support plus 30-day money back guarantee if anything goes wrong during transport due to manufacturing defects.
- Easy installation
- Lightweight and sturdy design
- Lifetime technical support plus 30 day money back guarantee in case of transport defects
- No rubber straps included to prevent movement or turning during transport (can be purchased separately)
The Juegoal is a rear bumper guard hitch step that provides enhanced safety when getting in and out of your vehicle. It features a non-slip tread with anti-skid grips to ensure superior stability, even for those who have limited mobility or use walkers. The open frame design prevents any accidents caused by slipping as well .
The Juegoal is constructed of heavy duty steel, with a powder-coated finish for rust resistance. It fits Class III and IV hitches (or any receiver up to three inches in diameter), as well as most factory installed tow packages on cars, SUVs, crossovers, trucks and vans. For those who own heavier vehicles or larger sized ones such as UTVs/ATVs, this bumper guard hitch step has the capacity to support up to 500 pounds. The weight of each product makes it easy enough for one person to install without assistance from another—simply attach the unit into your car’s receiver tube using included fasteners.
- Easy one person installation
- Rust resistant steel construction with powder coat finish
- Fits Class III and IV hitches or any receiver up to three inches in diameter including factory installed tow packages for cars, SUVs, crossovers, trucks and vans.
- May not be able to fit some factory hitch sizes.
The Genuine Jeep hitch mounted bumper protector is a top-rated product that mounts to your Class III or IV trailer hitch receiver and provides full length protection against dings, scratches, and damage. It features an integrated step for easy access into the vehicle and folds out of the way when not needed .
This sturdy steel construction will fit up to a two inch shank receiver tube , as well as tow hooks on many vehicles such as Jeeps & SUVs. Although it does come with fasteners for quick installation onto your car’s existing hardware, you can also use screws (not included) if they’re already installed in order to prevent any movement. The unit comes with a limited lifetime warranty and made in the USA.
This is our best pick for trailer hitch bumper guard, due to its high-quality construction that protects your entire factory receiver from damage, as well as providing an easy access step into your vehicle. It’s also unique because it can be used on many different types of vehicles without any hardware modifications required .
- Easy access step into vehicle
- High quality & sturdy steel construction
The Caos Trailer hitch mounted bumper protector is a great value pick that mounts to your Class III or IV trailer hitch receiver and provides full length protection against dings, scratches, and damage. It’s made with an aluminum-plated ABS plastic construction for maximum durability . This unit also features integrated LED lights powered by the included batteries which work as running lights when you’re not using it as a step into your vehicle at night time.
This sturdy built will fit up to two inch shank receiver tube , although if there are any existing tow hook holes on your car they may need adjusting in order to accommodate this product. The manufacturer includes all necessary screws & hardware, although some vehicles might require additional installation due to preexisting tow hook holes or bumper styles.
The Caos Trailer hitch mounted bumper protector is a great pick for its price and very popular among reviewers with an overall rating of four stars on Amazon . Customers love the ease of installation , but some did note that it could get scratched up if you accidentally back into something while it’s deployed, so keep this in mind before deciding to install one yourself!
- Aluminum-plated ABS plastic construction
- Two integrated LED lights powered by included batteries
- May need additional installation due to preexisting tow hook holes or bumper styles.
Buying a New Trailer Brake Controllers: What to Look For
- Type of brake controller
there are two types of controllers; proportional and time-delayed. Proportional is the more advanced type, while the latter simply waits a certain amount of time before applying brakes
it’s important to ensure that the size has been chosen for optimal compatibility with your vehicle and trailer
- Installation options
choose an option suitable for you from built in models which install directly into your dash board or portable units which can be placed on either side of the steering wheel
- Gauge compatibility
choose a model with an easy to read display and one that’s compatible with your existing vehicle gauges
- Number of brake control outputs
if you have more than one trailer, make sure the controller has multiple charge outlets
- Warranty conditions
look for a product that offers at least one year of warranty
Types of Trailer Hitch Step Bumpers
These are very common type of hitch guard bumpers. They provide protection for your car while parked by preventing any kind of damage which can be caused due to collisions with the back end or rear side bumper area on your vehicle when you’re stopped at traffic lights, intersections and other such places where chances of accidents increase owing to heavy congestion. Such types of trailer hitch step bumper guards come in full length models that cover most if not all rear body surface areas behind tail lamps thus protecting from impacts occurring head-on.
- Plastic Coated Tow Hitch Receiver Guards
If metal bars seem too much like a risk factor then plastic coated tow hitches guards offer an excellent option for best trailer hitch step bumper guards. They are designed to fit any standard tow hitch receiver and made up of powder coated high strength steel or aluminum bars for durability, which is why they can easily resist heavy impacts without causing any damage themselves.
- Hitch Mounted Step Bumpers vs Receiver Hitches Guards
If you’re looking for the best trailer hitches bumper guard then choosing between these two options can be a challenging task as both provide protection against accidents that may happen while parking your car but there are some significant differences between them worth noting down before making your purchase decision: – Trailer mounted step bumpers offer more comprehensive protection than receiver hitch guards but require permanent installation on the back side of rear end body area behind tail lamps whereas receiver hitches work well when used occasionally at places where there is heavy congestion. – Plastic coated tow hitch receiver guards are much lighter than step bumpers that can be installed on the back side of vehicles with a standard trailer hitch, but may not provide sufficient protection to your car in case any impact occurs from behind which is why it’s always advisable to use them along with best trailer hitches bumper guard for complete safety.
- Trailer Hitch Bumper Guards vs Other Options
In addition to these two types you also have other options available such as cargo areas mounted rear view cameras and sensors systems, mirror convex mirrors etc., but they usually cost more money so unless absolutely necessary or required by law then going for simpler alternatives like plastic coated tow hitch receiver guards or full length model trailers hitch step bumpers are the best options to go for.
Advantages of Trailer Brake Controllers
- Easy to install
- Can be easily removed when not needed
- Saves on battery power by automatically shutting off the controller once braking has stopped
- Allows the driver to maintain control of their vehicle at all times
- Can be easily adjusted to accommodate for different braking conditions
- Can be used in combination with the vehicle cruise control system
A trailer hitch step bumper is a great way to protect your vehicle’s rear end from damage if you need to load or unload heavy cargo. These bumpers are typically installed on the back of trailers, but they can also be found as part of some truck bed extenders. The best trailer hitch steps are easy to install and will help keep your car looking good for years down the road. If you’re in the market for one, read our reviews below before making a decision! We hope that this article has helped you learn more about these important safety accessories – now it’s time to take action. To find out which model is right for you, check out our buying guide with all the info needed about what features to look for and what to avoid.